BASIC MONITORING SYSTEMS
SENSOR DoorPass Two Reader Controller
 The SENSOR two reader DoorPass control unit provides basic monitoring of one or two access controlled doors.
It has an RS232 connection which may be used to connect it to a suitable printer to report "Door Foced" or "Door Left Open too long" alarms.
These alarms may also be reviewed on its built in LCD display. (The unit stores up to 1200 transactions - card use and alarms)
PDF Document on DoorPass
SENSOR DoorPass Two Reader Controller
 SENSOR's GuardPoint Pro Lite is perfect for the smaller installation still requiring some sofisticated functionality including Time and Attendance, Graphical alarm management and instant Roll Call reporting.
 The control equipment is fully compatible with the full GuardPoint Pro software package if you need your system to grows beyond the 8 controller GuardPoint Pro Lite limit.
PDF Document on GuardPoint Pro Lite
PAXTON Net2 Software
 PAXTON's FREE standard version Net2 software configures and monitors Paxton NET2 single door controllers to provide reporting of card use and door status, tamper circuit and control unit power supply status.
Each single door controller also has a relay which may be configured through the software to provide an auxiliary contact to drive local alarms or link to other systems.
Paxton Net2 Booklet PDF File Click to go to the Paxton Web Site
Kantech IoPass Single Door Controller
 The KANTECH two reader IoPass control unit provides basic monitoring of one controlled door.
It has one relay to provide an alarm output if the door is forced open or left open too long.
It also has a second relay which may be configured to provide a timed or latched operation to give an interface to another system from the use of a card or code.
PDF Document on IoPass